Stainless Steel Sheet

LeenGate offers, readily on hand, a full range of Stainless Steel rolled products including Sheet, Plate, Mesh, Perforated and Treadplate.

Family BS Spec EN Spec Basic Properties
Austenitic 304 1.4301 Good Corrosion resistance
Excellent Formability and weld-ability
Widely available
304L 1.4307
316 1.4401
316L 1.4404
321 1.4541



430 1.4016 Moderate corosion resistance
Good Formability
Low cost
n/a 1.4003

All common alloys are available and we are also equipped to source more specialist alloys on request.

Stainless Steel Sheet & Rolled Products

Stainless Steel Sheet & Rolled Products

For a more comprehensive table of available alloys, their properties and typical applications, please refer to our Stainless Steel page.



Stainless steel sheet is available in a variety of surface finishes.  The surface finish is not only concerned with the physical appearance of the sheet; it also affects the material's sensitivity to corrosion and its cleaning ability.  This is of particular significance to the food and health sector industries, arguably making the surface finish section process almost as important as selecting the appropriate grade.

Initially all sheet and plate is hot rolled.  This equates to a relatively matt grey and coarse appearance.  Generally speaking, the thicker the plate, the coarser the surface.  After this, there two main types of polishing:

  1. grained or satin; and
  2. brightened or mirrored.

For guidance purposes:

The sheet begins with an initial rolling step and is then annealed and pickled. It has a matt grey and coarse appearance.

Mostly associated with industrial equipment and production of pipes/tubes.

available off the shelf, from 3mm up to 20mm thick

2B is the standard basic finish on sheets up to 3mm thick and can be supplied on sheets up to 6mm thick. It has a smoother finish than hot rolled, due to a change in the rolling process, and has a dull, silky appearance.

It is often used in the manufacture of food processing equipment (eg: commercial kitchens)

available off the shelf, up to and including 6mm thick

Bright Annealed (BA) stainless steel sheet is cold rolled and annealed but not pickled. Annealing the sheet is the primary purpose of this process. Whilst it usually results in a brighter finish, the brightness is incidental to the process and is not guaranteed. BA sheet is often found in household appliances such as dish washers and washing machines

available off the shelf from 0.5mm up to 2mm thick

Dull Polished

Polishing leaves a uniformed grain running down the length of the product. It is achieved by passing the sheet through an abrasive belt to give it a consistent and an appealing finish and is often found in commercial kitchens and lifts. Depending on the grade of belt used, finishes can be from a coarse 80-grit up to 320-grit. A smooth textured finish can also be produced, introducing silicon in to the process (240s), and a popular alternative to standard dull polished sheet is our proprietary LeenSheen polish.

available off the shelf up to and including 6mm thick

Bright Polished

Produced with mops and compounds, as opposed to abraisive media. Provides reflectivity, ranging from bright-buffed to mirror-polished finishes. Often associated with architectural industries.

available off the shelf up to and including 4mm thick

Circle Polished

A special finish of overlapped and crossed circular patterns that can be varied to suit customer application. Often associated with catering and architectural industries.

available off the shelf in 0.7mm and 0.9mm thick


A proprietary LeenGate product that delivers long, shallow grains and a finer, smoother texture to the sheet. LeenSheen is a popular and superior alternative to dull polish which lends itself to applications where hygiene and ease of cleaning are important, for example: restaurants and canteens; kitchen equipment and food preparation areas; hospital equipment.

available off the shelf up to and including 3mm thick

Standard Metric Sizes

Theoretical Weight per Sheet (Kgs)

Standard Sizes (mm) Thickness (mm)
Length x Width 0.5 0.6 0.7 0.8 0.9 1.0 1.2 1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0 10.0 12.0
2000 x 1000 8.0 9.6 11.2 12.8 14.4 16.0 19.2 24.0 32.0 40.0 48.0 64.0 80.0 96.0 128.0 160.0 192.0
2500 x 1250 12.5 15.0 17.5 20.0 22.5 25.0 30.0 37.5 50.0 62.5 75.0 100.0 125.0 150.0 200.0 250.0 300.0
3000 x 1500 - - - - 32.4 36.0 43.2 54.0 72.0 90.0 108.0 144.0 180.0 216.0 288.0 360.0 432.0
4000 x 2000 - - - - - - - - 128.0 160.0 192.0 256.0 320.0 384.0 512.0 640.0 768.0
6000 x 2000 - - - - - - - - - - 288.0 384.0 480.0 576.0 768.0 960.0 1,152.0

In addition to our vast array of finishes held on the shelf, we also offer a full polish-to-order service and can even match polishing from sample swatches. For more of what we can offer, please visit our Services page.